Here we are going to show you how you can build your own Interactive Tile Floor. Cheap easy & professional with Spare Parts from elektric-junkys.com
REQUIRED TOOLS LIST.:
- circular saw "for Alutracks, handsaw also possible"
- Tile Cutting Machine "or Angle Grinder with Diamond Blade "
- Mixing Paddle "for tiling adhesive"
- Spirit Level Aluminum 500mm and 2000mm to level out the Adhesive
- Dental Spatula "Tile Adhesive Comb", Simple Spatula,
- Ladle to apply and level the adhesive
- Standard Sponge
- Grouting Float 220mm X 100mm
- 1-2 Bowls "one for water one for mix tile Adhesive "
- Side cutter (sharp)
- Screwdrivers mix (cross, slot, big & small)
- Hot Iron (sharp tip)
- Solder (thin)
- Heat gun & shrinkable tube all available in our shop
- Detergent (cleaning)
- Floor Tiles "decide Wise!!" "shops and Public areas need "NON SLIP TILES"
- Floor Tile adhesive "please check on your local Store for matching with tiles"
- Floor Primer
- Alutracks from our shop.elektric-junkys.com
- LED KIT from our shop.elektric-junkys.com
- Matching Power for our LED KIT
- "WIFI SYSTEM IF WANTED" optional get in touch with us
- Grout to fill the spares on tiles
THERE ARE A LOT OF SCAMMERS ON THE MARKET HERE USE REFURBISH CHIPS SECOND HAND IC´S THIRD PARTY LOW Q. ASSEMBLY PARTS AND MORE:::
THIS WILL CAUSE A LOT OF FAILURES AND SHORTER LIFETIME > Headache
Assembly Parts Order List (Links)
Paste the Tracks down on the floor to get a View mark with a Pen, or just work and fit the Tiles directly to the Alu Bars like we did! (4:10 min)
Add one tile after the other, relaxx, slowly Think-look-Check, don´t forget the Tile Crosses to hold the Symmetric Line and straightness, depending on your wanted interstice, you need to use specific Tile crosses or wood spares of 1-2-3-4-5mm Based on your Wishes .!
MAKE IT WATERPROOF, Use a Simple Industrial Silicone Tube with a tip Nozzle of about 3-5mm Depending on your Spare. Just shoot the Silicone into the Spare.
Spray over Soap water and scrape off the over standing Silicone ! Let it Dry out for a Night and you have Waterproofed your LED Supply !
For Maintenance and Repair Cases just CUT out the Silicone with a Razor of the affected part remove the 1.5m Acryl cover Repair our LED Supply, add back the Acrylic Stripe and Silicone it again !
Bathrooms with our system
Make your Own LED Tile floor or How to tile your Floor you can find on our Youtube.com/ejunky66 Channel 3D Floor Tiling Foils will follow soon
BE SAFE ! IF YOU ARE NOT SURE WHAT OR HOW TO DO CONTACT AN PROFFESSIONAL ! Don´t hurt yourself or others with actions caused by Unauthorized Machine Usage ! we take no responsibility´s for the here showen Instructions. THIS PROJECT IS FOR ENTERTAINMENT AND ADVERTISING PURPOSES ONLY !
If we forget something important please reply us or recheck in the Video also for information about the products the strip the power supply or any of OUR elektric-junkys DIY KITS we’d like to support you fast as possible